> Products>Routers>Mikrotik CCR1036-8G-2S+ - has two SFP+ ports for 10G interface support.
Mikrotik CCR1036-8G-2S+ - The new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support. View larger
Previous Next

Mikrotik CCR1036-8G-2S+ - has two SFP+ ports for 10G interface support.

CCR1036-8G-2S+

New

 CCR1036-8G-2S+  has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible.

More details

USD$1,095.00

QuantityDiscountYou Save
40 5% USD$2,190.00
100 10% USD$10,950.00

This product is no longer in stock

Add to wishlist

The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports, a serial console cable and a USB port.

The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more).

Performance test results

CCR1036-8G-2S+ (1200Mhz)All port testRouterOS
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)41,636.027,313.26,574.027,873.82,274.027,942.9
Bridging25 bridge filter rules5,817.03,816.05,630.023,871.22,274.027,942.9
Routingnone (fast path)41,636.027,313.26,574.027,873.82,274.027,942.9
Routing25 simple queues7,782.05,105.06,574.027,873.82,274.027,942.9
Routing25 ip filter rules3,081.02,021.12,796.011,855.02,274.027,942.9
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
CPU frequency :
1.2 GHz
CPU cores :
36
Architecture :
Tile
Size of RAM :
4 GB
10/100 Ethernet ports :
0
10/100/1000 Ethernet ports :
8
SFP ports :
0
SFP+ ports :
2
MiniPCI slots :
0
MiniPCI-e slots :
0
USB ports :
1
USB slot type :
microUSB type AB
Wireless :
No
Memory Card slot :
0
Power Jack :
1
CPU model :
TLR4-03680CG-12CE-A3b
802.3af support :
No
PoE in :
No
Voltage Monitor :
Yes
PCB temperature monitor :
Yes
CPU temperature monitor :
Yes
Operating temperature range :
-30C to +60C
Current Monitor :
Yes
Operating System :
RouterOS
License level :
Level 6
Number of chains :
0
SFP DDMI :
Yes
Memory card type :
microSD
Serial port :
RS232
Input Voltage :
18V - 28V
Dimensions :
355x145x55mm
PoE out :
No
Power Supply :
Built in
Rack :
Yes
Memory Card :
1

No customer comments for the moment.

Write a review

Mikrotik CCR1036-8G-2S+ - has two SFP+ ports for 10G interface support.

Mikrotik CCR1036-8G-2S+ - has two SFP+ ports for 10G interface support.

 CCR1036-8G-2S+  has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible.

Write a review